Beacon Lite User Manual

1. Intended use

The Beacon Lite serves as a small low power battery powered beacon device that is used to trigger a specific action on the Guide-ID Podcatcher Audio Guide.

It is intended to be used as indicated below.

Use	Description
Mounting	Tabletop or wall mounted
Power	Battery powered (CR2032)
Temperature range	0–45°C
Altitude	2000 m or less

It is equipped with a Bluetooth Low Energy radio that is generally only used to send periodic advertisements.

2. Safety Information

Please read all safety instructions carefully before using this product. Retain these instructions for future reference.

2.1 General Safety

• Use this product only for its intended purpose as described in this manual.
• Do not use this product if it appears damaged or malfunctions.
• Keep the product away from liquids and moisture unless otherwise specified.
• Do not attempt to repair or modify this product yourself. Contact Guide-ID for service.

2.2 Battery Safety

This product contains a coin / button cell battery. Observe the following precautions:

• Do not ingest battery, Chemical Burn Hazard. If the coin / button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
• Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
• Use only a CR2032 coin cell battery for your device. Using other battery types may cause malfunctions or damage and could void the product warranty.

2.3 Disposal and Recycling

This product contains a coin / button cell battery and electronic components that require special disposal:

• Do not dispose of this product in household waste. The product must be disposed of separately from general waste in accordance with local regulations.
• Return the product to Guide-ID for proper disposal.

3. Regulatory and Licensing Information

3.1 FCC Compliance Statement (United States)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.

FCC Class B Digital Device Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications to this equipment not expressly approved by Guide-ID could void the user’s authority to operate the equipment.

3.2 ISED Compliance Statement (Canada)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

• This device may not cause interference.
• This device must accept any interference, including interference that may cause undesired operation of the device.

3.3 RF Exposure Information

This device contains radio transmitters for Bluetooth Low Energy (BLE) communications.

This equipment complies with FCC and ISED radiation exposure limits set forth for an uncontrolled environment.

4. Certifications

4.1 Certification Details

This product has been tested and certified to comply with the following standards and regulations.

4.1.1 Europe (CE)

The product meets the essential requirements of all relevant European directives and is eligible for CE marking. The CE Declaration of Conformity can be obtained on request.

4.1.2 United Kingdom (CE)

The UK recognises the EU requirements for the regulations that apply to this product, and hence the applied CE marking is referenced for UK market access. The UK Declaration of Conformity can be obtained on request.

4.1.3 United States (FCC)

FCC ID: 2BS73-BL
This device complies with Part 15 of the FCC Rules.

4.1.4 Canada (ISED)

IC: 34863-BL
This device complies with ISED licence-exempt RSS standard(s).

4.1.5 International Safety (IECEE CB Scheme)

This product is certified under the IECEE CB Scheme for product safety.

• CB Test Certificate: DE 2-046205
• Issued by: TÜV Rheinland, Germany
• Standard: IEC 62368-1:2014

4.2 Contained Transmitters

The Beacon Lite contains the following radio transmitters:

Technology	Frequencies [MHz]	TX Power EIRP [dBm]	Modulation	Antenna type	Antenna gain [dBi]	Polarization
Bluetooth Low Energy (BLE)	2402 – 2480	4.5	GFSK	PCB Inverted-F antenna	5.0	Linear

4.3 Responsible Party Information

Email: helpdesk@guide-id.com
Website: www.guide-id.com
Phone: +31 (0) 570 572 202

Manufacturer:
Guide-ID
Leeuwenbrug 117
7411 TH Deventer
The Netherlands

US agent:
Jeff Danziger
282 Richards Ave
Norwalk, CT 06850
United States

UK Responsible Person:
Gordon Milton
Rivendell Digital
4 Chapel Row, Main Rd
Ffynnongroyw, Flintshire, CH89TW
United Kingdom

Canadian representative:
Jonathan Hughes
Canadian Certification Consulting, Inc.
2210 Horizon Drive, Suite 17
West Kelowna, BC V1Z 3L4
Canada

Related articles

• Beacon Lite Installation — placement, mounting, and platform configuration
• Beacon Lite Dimensions — wall mounting specifications
• Replacing Batteries — how to replace the CR2032 battery
• What is a Beacon? — overview of beacon types and how they work